View Shopping Cart" title="View Shopping Cart
Toll Free 1 (877) 470-2975

Nova and Chevy II subframe connectors for 1968, 1969, 1970, 1971, 1972, 1973, 1974 Part # 903


1968-74 Subframes, Body Mount Bushings
Nova and Chevy II subframe connectors for 1968, 1969, 1970, 1971, 1972, 1973, 1974 Part # 903
No cutting or modification of floor pans required.The subframe connectors are full length. This means the subframe connector is going to the back of the factory subframe and extend to the rear structural support rail going over the differential. The subframe connector is welded to the uni-body portion of the chassis, not bolted. The subframe connectors do not attach to the leaf spring front bracket bolts. Those bolts are 3/8 of an inch in diameter and are held in place with small nut clips and will not hold up. The subframe connector sandwiches between the factory frame and the body. It can be bolted or welded. Welding is always the best but in this case it is not as practical. If the car is in a collision, the frame needs to be replaced by unbolting the subframe: bolting to the original frame works because the material of the factory frame is 3/16” thick, all the sides are being bolted. Interloc body mount bushings should be used if subframes are installed. They compliment the subframes objective. Two bushings are included with subframe connectors. Use part #809, #819 or #816 for remaining bushings. Subframes are powder coated black Subframes are made from 1 5/8 x 0.125 wall DOM tubing Additional gussets and brackets are supplied with certain models No exhaust modifications are required (except for 904- see Tech tip) Minimal ground clearance lost (in most cases the exhaust is lower) Tech tip: #904 Requires 1 3/4 inches of clearance between the rocker rail and the exhaust pipe on the passenger side. The driver side is not an issue.
https://www.globalwest.netnova--chevy2-subframe-connectors-1968-1969-1970-1971-1972-1973-1974-chassis-stiffeners-global-west.html
$275.25
Subframe connectors for 1968, 1969, 1970, 1971, 1972, 1973, 1974 Nova and Chevy II  includes rear body mount bushings.
Click to Enlarge
No cutting or modification of floor pans required.The subframe connectors are full length. This means the subframe connector is going to the back of the factory subframe and extend to the rear structural support rail going over the differential. The subframe connector is welded to the uni-body portion of the chassis, not bolted. The subframe connectors do not attach to the leaf spring front bracket bolts. Those bolts are 3/8 of an inch in diameter and are held in place with small nut clips and will not hold up. The subframe connector sandwiches between the factory frame and the body. It can be bolted or welded. Welding is always the best but in this case it is not as practical. If the car is in a collision, the frame needs to be replaced by unbolting the subframe: bolting to the original frame works because the material of the factory frame is 3/16” thick, all the sides are being bolted. Interloc body mount bushings should be used if subframes are installed. They compliment the subframes objective. Two bushings are included with subframe connectors. Use part #809, #819 or #816 for remaining bushings. Subframes are powder coated black Subframes are made from 1 5/8 x 0.125 wall DOM tubing Additional gussets and brackets are supplied with certain models No exhaust modifications are required (except for 904- see Tech tip) Minimal ground clearance lost (in most cases the exhaust is lower) Tech tip: #904 Requires 1 3/4 inches of clearance between the rocker rail and the exhaust pipe on the passenger side. The driver side is not an issue.
Only: $305.83
On Sale Now: $275.25
Qty:
Instructions
Nova and Chevy II subframe connectors for 1968, 1969, 1970, 1971, 1972, 1973, 1974 Part # 903
Item #:903n
Availability:
View Shipping Policy
Only:$305.83
On Sale Now:$275.25 - You Save 10%
Quantity:
Instructions


Product Description
No cutting or modification of floor pans required.The subframe connectors are full length. This means the subframe connector is going to the back of the factory subframe and extend to the rear structural support rail going over the differential. The subframe connector is welded to the uni-body portion of the chassis, not bolted. The subframe connectors do not attach to the leaf spring front bracket bolts. Those bolts are 3/8 of an inch in diameter and are held in place with small nut clips and will not hold up. The subframe connector sandwiches between the factory frame and the body. It can be bolted or welded. Welding is always the best but in this case it is not as practical. If the car is in a collision, the frame needs to be replaced by unbolting the subframe: bolting to the original frame works because the material of the factory frame is 3/16” thick, all the sides are being bolted. Interloc body mount bushings should be used if subframes are installed. They compliment the subframes objective. Two bushings are included with subframe connectors. Use part #809, #819 or #816 for remaining bushings. Subframes are powder coated black Subframes are made from 1 5/8 x 0.125 wall DOM tubing Additional gussets and brackets are supplied with certain models No exhaust modifications are required (except for 904- see Tech tip) Minimal ground clearance lost (in most cases the exhaust is lower) Tech tip: #904 Requires 1 3/4 inches of clearance between the rocker rail and the exhaust pipe on the passenger side. The driver side is not an issue.
Email Year Make Model We respect your privacy.
We accept Visa, Mastercard, American Express, Discover 256bit encryption


Copyright © 2022 Global West Suspension Components Inc.