View Shopping Cart" title="View Shopping Cart
Toll Free 1 (877) 470-2975

1965-1970 Impala, Biscayne, Caprice and Bel Air Front Lower Control Arms (For Coil Spring) # CTA-50L


Control Arms, Sway Bar, Bushings
1965-1970 Impala, Biscayne, Caprice and Bel Air Front Lower Control Arms (For Coil Spring) # CTA-50L
Global West Suspension manufactures front lower control arms for the 1965, 1966, 1967, 1968, 1969, and 1970 Impala, Biscayne, Bel-Air and Caprice. Three advantages when choosing a rotating spring pocket: 1. Many people cut the coil spring to obtain a desired ride height. When you cut the spring, the spring will no longer line up in the lower arm or upper frame mount. In some cases, this can cause the spring to make noise rubbing on the edge of the pocket. Global West designed spring cushions to solve the rubbing issue. Rotating the cushion provides a way to re-index the spring. 2. The spring will be indexed properly around the coil. You will notice that most tubular lower control arms have a flat plate that the spring sits on. There really is no index. This places a lot of load at the very end of the coil spring rather than on the full coil. Over time this will fatigue the coil spring and sagging may occur. 3. Ride height adjustments can be made by shimming under the spring pocket.
  • For coil spring applications only
  • Spherical bearing instead of a rubber bushings
  • Strength: (Built out of 1-5/8 inch roll cage tubing )
  • The sway bar mounting plate adds support to the ball joint area.
  • Straps are used around the bushing housings, strengthening the housing to the tube.
  • The arms are pre-assembled
  • Steering bump stops are standard
  • Standard ball joints are used so they can be serviced anywhere.
  • bump stops
  • rotating spring cushions
For more information, watch the video above.

https://www.globalwest.netimpala-biscayne-caprice-bel-air-front-lower-control-arms-coil-spring-1965-1966-1967-1968-1969-1970-g.html
$661.28
Coil spring lower control arms for 1965, 1966, 1967, 1968, 1969 and 1970 Impala, Biscayne, Caprice and Bel-Air. - Made in the USA!
Click to Enlarge


Global West Suspension manufactures front lower control arms for the 1965, 1966, 1967, 1968, 1969, and 1970 Impala, Biscayne, Bel-Air and Caprice.

Three advantages when choosing a rotating spring pocket:

1. Many people cut the coil spring to obtain a desired ride height. When you cut the spring, the spring will no longer line up in the lower arm or upper frame mount. In some cases, this can cause the spring to make noise rubbing on the edge of the pocket. Global West designed spring cushions to solve the rubbing issue. Rotating the cushion provides a way to re-index the spring.

2. The spring will be indexed properly around the coil. You will notice that most tubular lower control arms have a flat plate that the spring sits on. There really is no index. This places a lot of load at the very end of the coil spring rather than on the full coil. Over time this will fatigue the coil spring and sagging may occur.

3. Ride height adjustments can be made by shimming under the spring pocket.
  • For coil spring applications only
  • Spherical bearing instead of a rubber bushings
  • Strength: (Built out of 1-5/8 inch roll cage tubing )
  • The sway bar mounting plate adds support to the ball joint area.
  • Straps are used around the bushing housings, strengthening the housing to the tube.
  • The arms are pre-assembled
  • Steering bump stops are standard
  • Standard ball joints are used so they can be serviced anywhere.
  • bump stops
  • rotating spring cushions
For more information, watch the video above.
Only: $734.75
On Sale Now: $661.28
Qty:
Instructions
1965-1970 Impala, Biscayne, Caprice and Bel Air Front Lower Control Arms (For Coil Spring) # CTA-50L
Item #:CTA-50L
Availability:
View Shipping Policy
Only:$734.75
On Sale Now:$661.28 - You Save 10%
Quantity:
Instructions


Product Description


Global West Suspension manufactures front lower control arms for the 1965, 1966, 1967, 1968, 1969, and 1970 Impala, Biscayne, Bel-Air and Caprice.

Three advantages when choosing a rotating spring pocket:

1. Many people cut the coil spring to obtain a desired ride height. When you cut the spring, the spring will no longer line up in the lower arm or upper frame mount. In some cases, this can cause the spring to make noise rubbing on the edge of the pocket. Global West designed spring cushions to solve the rubbing issue. Rotating the cushion provides a way to re-index the spring.

2. The spring will be indexed properly around the coil. You will notice that most tubular lower control arms have a flat plate that the spring sits on. There really is no index. This places a lot of load at the very end of the coil spring rather than on the full coil. Over time this will fatigue the coil spring and sagging may occur.

3. Ride height adjustments can be made by shimming under the spring pocket.
  • For coil spring applications only
  • Spherical bearing instead of a rubber bushings
  • Strength: (Built out of 1-5/8 inch roll cage tubing )
  • The sway bar mounting plate adds support to the ball joint area.
  • Straps are used around the bushing housings, strengthening the housing to the tube.
  • The arms are pre-assembled
  • Steering bump stops are standard
  • Standard ball joints are used so they can be serviced anywhere.
  • bump stops
  • rotating spring cushions
For more information, watch the video above.
Email Year Make Model We respect your privacy.
We accept Visa, Mastercard, American Express, Discover 256bit encryption


Copyright © 2022 Global West Suspension Components Inc.