View Shopping Cart" title="View Shopping Cart
Toll Free 1 (877) 470-2975

1963-1982 Corvette Tubular Lower Control Arms for Coilover #CTA-31H


Control Arms, Bushings and Shafts for C2 and C3 Corvettes
1963-1982 Corvette Tubular Lower Control Arms for Coilover #CTA-31H
Global West manufactures coilover tubular lower control arms for Corvettes--model years 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, and 1982. The Global West Advantage: We redesigned the stock lower arm and installed of a coilover kit in place of the standard spring, which installs on the top of the control arm and not from underneath. Then, we specifically designed a control arm to handle the load of a coilover application. The design of the lower arm would also clean up the appearance showing off the coilover kit. Therefore, the CTA-31H was designed.
  • The shock plate in the arm is doubled for additional strength to accepted the load. This is ideal because the these cars almost weigh 4000lb.
  • Comes with bump stop just like the factory
  • Has stock ball joint so when the ball joint wears out you can go to any parts store and get a replacement
  • Works with stock spindles and drop spindles
  • Assemble with billet cross shafts and our Del-a-lum bushings
  • We increase the bushing surface area because the factory lower control arm has a lot of deflection and the bushings can not handle all the load being generated especially when you start cornering. So by increasing the bushing surface area, it will increased load capacity.
  • The max lowering adjustment recommended is 1-1/4 inches without running into problems with insufficient shock travel.
The control arms are shipped pre-assembled for your convenience. For more information, watch the YouTube video above.

https://www.globalwest.netcorvette-tubular-control-arms-coilover-global-west-1963-1964-1965-1966-1967-1968-1969-1970-1971-1972.html
$751.19
Lower control arm for Coil-over applications. Fits on 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, and 1982. Made in the USA!
Lower control arm for Coil-over applications. Fits on 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, and 1982. Made in the USA!Reinforced shock plateSway bar tabBump stopIncluded hardware
Click to Enlarge


Global West manufactures coilover tubular lower control arms for Corvettes--model years 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, and 1982.

The Global West Advantage:

We redesigned the stock lower arm and installed of a coilover kit in place of the standard spring, which installs on the top of the control arm and not from underneath. Then, we specifically designed a control arm to handle the load of a coilover application. The design of the lower arm would also clean up the appearance showing off the coilover kit. Therefore, the CTA-31H was designed.

  • The shock plate in the arm is doubled for additional strength to accepted the load. This is ideal because the these cars almost weigh 4000lb.
  • Comes with bump stop just like the factory
  • Has stock ball joint so when the ball joint wears out you can go to any parts store and get a replacement
  • Works with stock spindles and drop spindles
  • Assemble with billet cross shafts and our Del-a-lum bushings
  • We increase the bushing surface area because the factory lower control arm has a lot of deflection and the bushings can not handle all the load being generated especially when you start cornering. So by increasing the bushing surface area, it will increased load capacity.
  • The max lowering adjustment recommended is 1-1/4 inches without running into problems with insufficient shock travel.


The control arms are shipped pre-assembled for your convenience.

For more information, watch the YouTube video above.
Only: $834.66
On Sale Now: $751.19
Qty:
Instructions
1963-1982 Corvette Tubular Lower Control Arms for Coilover #CTA-31H
Item #:CTA-31H
Availability:
View Shipping Policy
Only:$834.66
On Sale Now:$751.19 - You Save 10%
Quantity:
Instructions


Product Description


Global West manufactures coilover tubular lower control arms for Corvettes--model years 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, and 1982.

The Global West Advantage:

We redesigned the stock lower arm and installed of a coilover kit in place of the standard spring, which installs on the top of the control arm and not from underneath. Then, we specifically designed a control arm to handle the load of a coilover application. The design of the lower arm would also clean up the appearance showing off the coilover kit. Therefore, the CTA-31H was designed.

  • The shock plate in the arm is doubled for additional strength to accepted the load. This is ideal because the these cars almost weigh 4000lb.
  • Comes with bump stop just like the factory
  • Has stock ball joint so when the ball joint wears out you can go to any parts store and get a replacement
  • Works with stock spindles and drop spindles
  • Assemble with billet cross shafts and our Del-a-lum bushings
  • We increase the bushing surface area because the factory lower control arm has a lot of deflection and the bushings can not handle all the load being generated especially when you start cornering. So by increasing the bushing surface area, it will increased load capacity.
  • The max lowering adjustment recommended is 1-1/4 inches without running into problems with insufficient shock travel.


The control arms are shipped pre-assembled for your convenience.

For more information, watch the YouTube video above.
Email Year Make Model We respect your privacy.
We accept Visa, Mastercard, American Express, Discover 256bit encryption


Copyright © 2022 Global West Suspension Components Inc.